23
Chapter 4 Maintenance
3.
Remove the fan from the fan holder.
Label surface
Fan
Screw M3 x 20 (four pcs)
Tapped holes (four holes)
Fan holder
1. Remove the screws (four pcs) that secure the fan.
Use a Phillips screwdriver to remove the screws.
2. Remove the fan.
4.
Install a new fan in the fan holder.
Attention
•
Handle the fan with care. Dropping or subjecting the fan to physical shocks may damage it.
• Pay attention to the orientation of the fan when installing it.
1. Fix the fan to the folder using the screws removed in step 3 (
page 23
) (recommended torque:
0.78 ± 0.2 N•m). Install the fan so that its label surface is oriented outwards.
