14
Chapter 2 Adjusting Screens
"Setup" tab
Item
Adjustable
Range
Description
Color Mode Setting
Off
On
Specifies whether to operate the backlight with the
brightness set to the maximum level.
Set this to "Off" to operate the backlight with the
maximum brightness level. Set this to “On” to adjust the
backlight to the ECDIS brightness level. The brightness
is not set to the maximum level.
DPMS
Off
On
Enables or disables the power saving setting. Set this
to "On" to turn the backlight off when no signal is input.
OSD
Transparency
0 to 100
Adjusts transparency for the background color of the
Adjustment menu.
OSD Timeout [sec] 15 to 60
Specifies the time-out period of the Adjustment menu.
OSD Lock
Off
On
Displays the password input screen when the
Adjustment menu appears.
Note
• Procedure for disabling the password
1. Press to display the password input screen.
2. Enter the password that was set in “OSD
Access Code”
(page 14)
, and press .
The
Adjustment menu appears.
3. Set "OSD Lock" to "Off".
Key Lock
Off
On
Locks control buttons (excluding ) to prevent changes
to settings.
Note
• Procedure for disabling the lock state
1. Hold down
for five seconds or more to turn off
the monitor.
2. Holding down
for five seconds or more and
press to turn on the monitor. Keep holding
down until the "Keys Unlocked" message
appears on the upper right of the screen.
OSD Access
Code
(Four digits)
Specifies the password used for "OSD Lock".
Note
• The default password is "1234".
Source
Source Scan
Off
On
Automatically recognizes the connector through which
PC signals are input and displays images on the screen
accordingly.
Scan DVI-1
Off
On
Specifies whether to run "Source Scan" for each
connector. To set an item to "On", "Source Scan" must
be set to "On" in advance.
Scan DVI-2
Off
On
Scan RGB-2
Off
On
Scan VGA
Off
On
Scan CVBS
Off
On
Language
English
German
Spain
French
Selects the language.
Test pattern
-
Displays the test pattern.
Factory / User Settings
-
Returns the settings to the default values.
