Eitan Q Core Sapphire Скачать руководство пользователя страница 229

Страница: 229 / 294

Using Advanced Features

228

Throughout the Standby period, the following information appears on the screen:

•

Drug Name:

The name of the selected drug. Displayed on the indicators bar,

when working with a Drug Library.

•

Concentration:

Drug concentration as entered by the user (Final

concentration or Drug Amount / Diluent Volume). Displayed when applicable.

•

Rate:

Programmed infusion rate. For all dose units other than mL/h, the

calculated rate will be displayed in mL/h, both in the

View system

menu and in

the

Running

screen.

•

VTBI:

Total volume left to be infused. This parameter remains constant

throughout the Standby period.

•

VI / Total:

Total volume that has been infused in the current infusion / the VTBI

value programmed. These parameters remain constant throughout the
Standby period.

•

Time left:

Time remaining until the end of the current infusion. This parameter

remains constant throughout the Standby period.

During Standby, Pump unattended alarm will not be active.

To view all of the current infusion programmed parameters, from the

Standby

screen, press

View/Edit



View system



Infusion

Values

When in Standby, the pump can be turned Off without losing the
infusion parameters. To resume infusion, refer to

To abort Standby and the infusion, from the toolbar, press

End

Standby

; then, from the

Confirm

screen, press

Exit

. The

Start Up

screen will appear.

Содержание Q Core Sapphire







































































































































































































































































































Результаты поиска

Содержание Q Core Sapphire

Отзывы:

Похожие инструкции для Q Core Sapphire

Бренды по названию

Популярные бренды

Eitan Q Core Sapphire, Руководство пользователя

Результаты поиска

Содержание Q Core Sapphire

Отзывы:

Похожие инструкции для Q Core Sapphire

Бренды по названию

Популярные бренды