background image

EN

- 8 -

performed by the manufacturer or authorized 

service providers.

Additional safety instructions

We pay a great deal of attention to the design 

of every battery pack to ensure that we supply 

you with batteries which feature maximum 

power density, durability and safety. The battery 

cells have a wide range of safety devices. 

Each individual cell is initially formatted and its 

electrical characteristic curves are recorded. 

These data are then used exclusively to be able 

to assemble the best possible battery packs.

Despite all the safety precautions, caution 

must always be exercised when handling 

batteries. The following points must be 

obeyed at all times to ensure safe use.

Safe use can only be guaranteed if 

undamaged cells are used. Incorrect 

handling can cause cell damage.

Caution! 

Analyses con

fi

 rm that incorrect use and 

poor care are the main causes of the damage 

caused by high performance batteries.

Information about the battery

1.  The battery pack supplied with your cordless 

tool is not charged. The battery pack has to 

be charged before you use the tool for the 

fi

 rst 

time.

2.  For optimum battery performance avoid low 

discharge cycles. Charge the battery pack 

frequently.

3.  Store the battery pack in a cool place, ideally 

at 59°F (15°C) and charged to at least 40%.

4.  Lithium-Ion batteries are subject to a natural 

ageing process. The battery pack must be 

replaced at the latest when its capacity 

falls to just 80% of its capacity when new. 

Weakened cells in an aged battery pack are 

no longer capable of meeting the high power 

requirements and therefore pose a safety risk.

5.  Do not throw battery packs into an open 

fi

 re. 

There is a risk of explosion!

6.  Do not ignite the battery pack or expose it to 

fi

 re.

7. 

Do not exhaustively discharge batteries.

Exhaustive discharge will damage the battery 

cells. The most common cause of deep 

discharge is lengthy storage or non-use of 

partly discharged batteries. Stop working as 

soon as the performance of the battery falls 

noticeably or the electronic protection system 

triggers. Place the battery pack in storage 

only after it has been fully charged.

8. 

Protect batteries and the tool from 

overloads. 

Overloads will quickly result 

in overheating and cell damage inside the 

battery housing without this overheating 

actually being apparent externally.

9. 

Avoid damage and shocks. 

Replace 

batteries which have been dropped from 

a height of more than one meter or which 

have been exposed to violent shocks without 

delay, even if the housing of the battery pack 

appears to be undamaged. The battery cells 

inside the battery may have su

 ered serious 

damage. In this respect, please also read the 

waste disposal information.

10.  If the battery pack su

 ers overloading and 

overheating, the integrated protective cut-

o

  will switch o

  the equipment for safety 

reasons. Caution! Do not press the ON/OFF 

switch any more if the protective cut-o

  has 

actuated. This may damage the battery.

11.  Use only original battery packs. The use 

of other batteries may result in injuries, 

explosion and a 

fi

 re risk.

12.  

Protect your rechargeable battery against 

moisture, rain and high humidity. 

Moisture, 

rain and high humidity can cause dangerous 

cell damage. Never charge or work with 

batteries which have been exposed to 

moisture, rain or high humidity – replace them 

immediately.

13.  If your equipment is 

fi

 tted with a detachable 

battery, remove the battery for safety reasons 

after you have 

fi

 nished your work.

Information on chargers and the charging 

process

1.  Please check the data marked on the rating 

plate of the battery charger. Be sure to 

connect the battery charger to a power supply 

with the voltage marked on the rating plate. 

Never connect it to a di

 erent mains voltage.

2.  Protect the battery charger and its cable from 

damage and sharp edges. Have damaged 

cables repaired without delay by a quali

fi

 ed 

electrician.

3.  Keep the battery charger, batteries and the 

cordless tool out of children‘s reach.

4.  Do not use damaged battery chargers.

5.  Do not use the supplied battery charger to 

charge other cordless tools.

6.  In heavy use the battery pack will become 

warm. Allow the battery pack to cool to room 

temperature before commencing with the 

charging.

7. 

Do not over-charge batteries.

 Do not 

Anl_TE_AC_36_6_8_Li_OF_USA_SPK7.indb   8

Anl_TE_AC_36_6_8_Li_OF_USA_SPK7.indb   8

21.04.2022   12:54:40

21.04.2022   12:54:40

Содержание 4020455















































Отзывы: