background image

EN

- 6 -

DANGER!

When using the equipment, a number of safety 

precautions must be observed to avoid injuries 

and damage. Please read the complete operating 

instructions and safety information with due care. 

Keep these operating instructions in a safe place 

so that the information is available at all times. If 

you give the equipment to any other person, hand 

over these operating instructions and the safety 

information as well. We cannot accept any liability 

for damage or accidents which arise due to 

failure to follow these instructions and the safety 

information.

1. Safety information

DANGER!

Read all the safety information and 

instructions. 

Failure to adhere to the safety 

information and instructions set out below 

may result in electric shock, 

fi

 re and/or serious 

injury. 

Keep all the safety information and 

instructions in a safe place for future use.

General safety information for power tools

The term “power tool“ used in the safety 

regulations refers to power tools operated from 

the mains power supply (with a power cable) and 

to battery operated power tools (without a power 

cable).

1)  Work area safety

a)  

Keep work area clean and well lit. 

Cluttered and dark areas invite accidents.

b)  

Do not operate power tools in explosive 

atmospheres, such as in the presence of 

fl

 ammable liquids, gases or dust.

 

Power 

tools create sparks which may ignite the dust 

or fumes.

c) 

Keep children and bystanders away while 

operating a power tool. 

Distractions can 

cause you to lose control.

2) Electrical safety

a)   

 Power tool plugs must match the outlet. 

Never modify the plug in any way. Do 

not use any adapter plugs with earthed 

(grounded) power tools.

 

Unmodi

fi

 ed plugs 

and matching outlets will reduce risk of 

electric shock.

b)    

Avoid body contact with earthed or 

grounded surfaces such as pipes, 

radiators, ranges and refrigerators. 

There 

is an increased risk of electric shock if your 

body is earthed or grounded.

c)    

Do not expose power tools to rain or wet 

conditions. 

Water entering a power tool will 

increase the risk of electric shock.

d)    

Do not abuse the cord. Never use the 

cord for carrying, pulling or unplugging 

the power tool. Keep cord away from 

heat, oil, sharp edges or moving parts. 

Damaged or entangled cords increase the 

risk of electric shock.

e)    

When operating a power tool outdoors, 

use an extension cord suitable for 

outdoor use. 

Use of a cord suitable for 

outdoor use reduces the risk of electric 

shock.

f)    

If operating a power tool in a damp 

location is unavoidable, use a ground 

fault circuit interruptor (GFCI) protected 

supply.

 

Use of an GFCI reduces the risk of 

electric shock.

3)   Personal safety

a)    

Stay alert, watch what you are doing and 

use common sense when operating a 

power tool. Do not use a power tool while 

you are tired or under the in

fl

 uence of 

drugs, alcohol or medication.

 

A moment of 

inattention while operating power tools may 

result in serious personal injury.

b)    

Use personal protective equipment. 

Always wear eye protection. 

Protective 

equipment such as dust mask, non-skid 

safety shoes, hard hat, or hearing protection 

used for appropriate conditions will reduce 

personal injuries.

c)    

Prevent unintentional starting. Ensure 

the switch is in the O

 -position before 

connecting to power source and/or 

BATTERY pack, picking up or carrying the 

tool. 

Carrying power tools with your 

fi

 nger on 

the switch or energizing power tools that have 

the switch on invites accidents.

d)    

Remove any adjusting key or wrench 

before turning the power tool on. 

A wrench 

or a key left attached to a rotating part of the 

power tool may result in personal injury.

e)    

Do not overreach. Keep proper footing 

and balance at all times.

 

This enables 

better control of the power tool in unexpected 

situations.

f)    

Dress properly. Do not wear loose 

clothing or jewellery. Keep your hair, 

clothing and gloves away from moving 

parts.

 

Loose clothes, jewelery or long hair 

Anl_TE_AC_36_6_8_Li_OF_USA_SPK7.indb   6

Anl_TE_AC_36_6_8_Li_OF_USA_SPK7.indb   6

21.04.2022   12:54:40

21.04.2022   12:54:40

Содержание 4020455















































Отзывы: