EN
- 11 -
are displayed on the outer packaging of
the processed material, must be observed.
Additional protective measures are to be
undertaken if necessary, particularly the
wearing of suitable clothing and masks.
•
Do not smoke during the spraying process
and/or in the work area. There is a risk
of explosion! Paint vapors are easily
combustible.
•
Never set up or operate the equipment in the
vicinity of a fire place, open lights or sparking
machines.
•
Do not store or eat food and drink in the work
area. Paint vapors are harmful to your health.
•
The work area must exceed 1060 cu ft
(30 m
3
) and sufficient ventilation must be
ensured during spraying and drying. Do not
spray against the wind. Always adhere to the
regulations of the local police authority when
spraying combustible or hazardous materials.
•
Do not process media such as white spirit,
butyl alcohol and methylene chloride with the
PVC pressure hose. These media will destroy
the pressure hose.
Operating pressure vessels
•
You must keep your pressure vessel in good
working order, operate the vessel correctly,
monitor the vessel, carry out necessary
maintenance and repair work immediately
and meet the relevant safety precautions.
•
The supervisory authority may enforce
essential control measures in individual
cases.
•
A pressure vessel is not allowed to be used if
it has faults or deficiencies that can endanger
workers or third parties.
•
Check the pressure vessel for signs of rust
and damage each time before using. Do not
use the compressor with a damaged or rusty
pressure vessel. If you discover any damage,
then please contact the customer service
workshop.
SAVE THESE INSTRUCTIONS
2. Layout and items supplied
2.1 Layout
1. Housing
cover
2. Pressure tank
3. Intake air
fi
lter
4. Foot
5. Quick-lock coupling (regulated compressed
air)
6. Pressure gauge (for reading the set pressure)
7. Pressure regulator
8. ON/OFF switch
9. Transport handle
10. Safety valve
11. Drainage cock for condensation water
12. Lithium-Ion battery pack (not supplied)
13. Storage compartment for 8-piece adapter set
14. 8-piece adapter set
15. Air Blow gun with Pressure gauge
16. Blow-out adapter
17. Air hose
18. Battery cover
19. Switch for battery charge level indicator
20. Battery charge level indicator
21. Adapter I
22. Adapter II
23. Vent adapter
24. Relief valve
25. In
fl
ating needle
26. Schrader to Presta adapter for bicycle tires
27. Plastic nozzle adapter
28. Tapered Metal nozzle
29. Tapered Rubber nozzle
30. Air Chuck hose
2.2 Items supplied
Please check that the article is complete as
speci
fi
ed in the scope of delivery. If parts are
missing, please contact our service center or the
store where you made your purchase at the latest
within 5 work days after purchasing the article and
upon presentation of a valid bill of purchase.
•
Open the packaging and take out the
equipment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
present).
•
Check to see if all the items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, keep the packaging until the end
of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, plastic sheets and small parts. There is
a risk of choking and su
ff
ocating!
•
Air blow gun with pressure gauge
•
Blow-out adapter
•
8-piece adapter set
Anl_TE_AC_36_6_8_Li_OF_USA_SPK7.indb 11
Anl_TE_AC_36_6_8_Li_OF_USA_SPK7.indb 11
21.04.2022 12:54:40
21.04.2022 12:54:40
