_NV Ron 2000 4.2
26/37
3/25/2016
Time Interval (T) selection
Enter into the options menu by following the instructions in section 9.
Scroll to ADL.TI by using the arrows keys, then
Press:
ENTER
Display:
DAY
Press:
ENTER
Display:
0000
– The two digits on the left will be blinking. Use the arrows
keys to select the number of days.
Press:
ENTER
Display:
OK
, then
HOUR
Press:
ENTER
Display:
0000
- Now the two digits on the right will be blinking. Use the
arrow keys to select the number of hours.
This procedure continues, enabling the user to select the time interval (T) by
selecting:
Days (up to 31) and/or
Hours (up to 24) and/or
Minutes (up to 60) and/or
Seconds (up to 60)
Once the selection is completed, press
ESC
to exit and return to the options
menu.
9.11 Dynamic Data Logger (if included)
The dynamic data logger (DDL) allows for capture of dynamic events with a high
measurement rate. The dynamic data logger is capable of recording at a rate of up to 24
measurements per second.
If the system includes the DDL, the display will show
DDL.OF
after the indicator
is turned "on".
To start logging press
DATA L.
and then
TOTAL
. Display:
DDL. AV
To stop logging press
DATA L.
and then
TOTAL
. Display:
DDL. OF
After pressing
DATA L.
you will have three seconds to press
TOTAL.
