_NV Ron 2000 4.2
25/37
3/25/2016
connected to the load cell, wait for the screen to show
ESC
. Then you may
output the data with the commands above.
9.10 Automatic Data Logger (if included)
The automatic data logger (ADL) automatically logs ongoing
weight values, repeatedly, in a time interval (T) that is set by
the user. It will store up to 600 data lines when using the
standard memory, or a higher number of lines when using larger memories.
Along with the weight value, a data line includes:
The unit of measurement (Lbs, Kg, kN etc.)
The tare condition (gross or net)
The line number in the memory (1, 2, 3 etc.)
The date and time that the weight value was recorded
Function: ADL. MX, ADL. MN, ADL. AV.
If the system includes the ADL, the display will show
ADL.OF
after the
indicator is turned "on". The ADL functions in time intervals (T) set by the
user and has three functions that affect the weight value stored: MAX, MIN &
AVERAGE.
MAX: The maximum value registered by the system during each time
interval will be logged in the memory. To begin logging, the user must
switch from
ADL.OF
to
ADL.MX
by pressing
DATA L
and then
ESC
.
One of the functions (
ADL.AV
,
ADL.MN
or
ADL.AV
) will be displayed.
In order to switch to a different function than that which is displayed, the
user must again press
DATA L
.
then
ESC
until the desired function appears.
Once the desired function is chosen, the ADL is ready to log.
To start logging press
DATA L.
and then
TOTAL
. Display:
ADL. MX
To stop logging press
DATA L.
and then
TOTAL
. Display:
ADL. OF
MIN & AVE: Like MAX but the minimum or average value will be stored.
During Logging:
After about 25 seconds the display will show:
ADL. MX
(OR MN, OR AV)
and then after another 25 seconds:
LOGS
.
The number of lines logged can be displayed by pressing
DATA L.
and then
TARE
. The display will read
DL. N
. and then the number of lines logged.
Note:
The system must
be equipped with the RS-
232 digital output and the
Real Time Clock.
