_NV Ron 2000 4.2
8/37
3/25/2016
LBS
K.NTON (Kilo Newton)
DECA.N (Deca Newton)
N.WTON (Newton)
KG
The current weight value will then be displayed.
Before loading the system, press
ZERO
until
ZERO
is displayed. The system
should then read
GROSS
then
0
.
Once use of the system has been completed, press the
ON/OFF
key to power
down. Return both the load cell and indicator to their carrying case or another
appropriate safe place of storage.
When closing the carrying case, please ensure that the cable is not caught in the
edges of the case as this will likely damage the cable.
General operation of the keyboard:
When pressing a key, the system responds with a short audio signal
(a beep) followed by a change to the display. For example, if one
presses the
MAX
key, the
MAX
sign will be displayed. The key
should be pressed continuously until the beep is heard and visual sign appears.
Exceptions are turning the system on or off which does not require a long press. Also,
when several keys are pressed in sequence as part of a code during calibration, the
visual signal will only appear upon completion of the code, but the beep will still follow
each valid key press. If the pass code is not accepted, the display will read
COD.E.R
.
In this case, a new attempt should be made. (See Calibration for more.)
3. Tare
Switching between Gross and Net modes
T
he system features a Tare function that enables the user to ensure the display
reads 0 even though there may be weight on the system such as from a sling,
shackles or a container. This capability makes the system easy to use as it
eliminates the need for the operator to subtract the weight of the container etc.
when only the net amount of the load is required.
