47
Test Pattern
Expand
This function is used to set the internal test
signal:Gray scale 1,Gray scale 2,Gray scale
3,Gray scale 4, Color bar, Red, Green, Blue,
Cross hatch,White,Black and Gray.
Network
Test Pattern
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move
Next
Back
Test Pattern
Off
Gray scale 1
Gray scale 2
Gray scale 3
Gray scale 4
Color bar
Red
Green
Blue
Cross hatch
Network
Function : PC controls projector via LAN.
Preparation:
1. Equipments: PC, projector, cables
2. Connection procedures:
Connect the projector to routers or switches of the LAN by parallel or cross cable. If it fails to
connect PC and projector by parallel cable, please switch to cross cable as suggested.
3. After the computer is booted and the projector is plugged in, indicator lights of LAN interface
will flash continuously.
Operation procedures:
1.Turn on the projector.
2. Obtain network address. DHCP set is
displayed as On and obtain network address
automatically.(If familiar with network, you
can set DHCP as Off and obtain network
address manually.)
3. Enter network settings menu.
(1) Press MENU button on the remote
control to display screen menu. Press
button to select Expand, then press
OK button.
(2) Press
button to select Network,
and then press OK button to enter the
newtork menu.
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move
Next
Exit
Network
Network setting
Network information:
MAC address: 000000000000
IP address:
192.168.001.023
