46
Filter counter
Expand
Note:
Factory default setting is 5 min.
This function is used to set a frequency for
filter cleaning.
When the projector reached a specified time
between cleanings, a Filter warning icon
appears on the screen, notifying the cleaning
is necessary. After cleaning the filter, be sure
to select RESET and set the timer. The Filter
warning icon will not turn off until the filter
counter is reset.
Filter counter.......The time that filter used.
Timer...................Frequency for filter cleaning.
Filter counter reset..Reset the filter counter.
Power management
Power management
Filter counter
PC adjust
Display
Color adjust
Setting
Expand
Info.
Adjust
Select
Back
Power management
Ready
Shut down
Off
Timer 5 Min
Ready countdown 0 Min
PC adjust
Display
Color adjust
Setting
Expand
Info.
Move
Next
Back
Filter counter
Filter counter 0 H
Timer 400 H
Filter counter reset
Power management
No signal
01 : 20
Time left before Lamp is off.
For reducing power consumption as well as maintaining the lamp life, the Power management
function turns off the projection lamp when the projector is not operated for a certain period. Select
one of the following options:
Ready ................... When the lamp has been fully cooled down, the POWER indicator changes
to green blinking. In this condition, the projection lamp will be turned on if the
input signal is reconnected or any button on the top control or remote control is
pressed.
Shut down ............. When the lamp has been fully cooled down, the power will be turned off.
Off ......................... Power management function is off.
Timer ..................... If the input signal is interrupted and no button is pressed for more than 30
seconds, the timer display with No signal appears. It starts the countdown until
the lamp is turned off. Press
button to set the Timer(1~30min.)
Ready countdown.. Set the time that automatically from ready status transfers to standby status (0-
30min). 0 Min: without automatically transfer.
In ready status, press POWER button to swicth to standby status, and press
any other button to turn on the projector.
