17
Part names and functions
Terminals
① ②
③
④
⑤ ⑥
⑦
⑫
⑪
⑩
⑨
⑧
①
MONO(R/L)
For a mono audio signal (a single audio
jack), connect it to MONO(R/L) jack.
②
AUDIO OUT
Connect external audio amplifier to this jack.
③
VGA IN
Connect a computer output to this terminal.
④
HDMI 1 / HDMI 2
This is the terminal to input the HDMI 1 / HDMI
2 signals
⑤
USB-B
This terminal is used to connect the
projector to the computer with a USB cable
when you want to use the "USB Display"
function.(Refer to Page 69-70).
⑥
USB-A
When using the "Memory Viewer" function,
insert the USB memory directly to this
terminal.(Refer to Page 67-68)
⑦
VIDEO IN
This is the terminal to input video signals.
⑧
AUDIO IN
This is the terminal to input computer audio
signals.
⑨
VGA OUT
Output the analog signal form
②
to other
monitor.
⑩
RS-232C
When using RS232 to control the projector,
please connect the serial control line to this
terminal.
⑪
Remote Control receiver(BACK)
Operation the projector by remote control.
⑫
LAN
- This is the LAN terminal to connect to the
network.
- Connect the projector to the computer via
RJ45 cable when you use the "Network"
Display function.
