6
USER MANUAL
RETEVET™ PORTABLE ERG
T +49 7461 96 580 0 | F +49 7461 96 580 90 | [email protected] | www.eickemeyer.com
Joystick
The joystick provides a simple and intuitive user interface. Use your thumb to push the joystick in the desired direction.
UP and DOWN move the selection highlight up or down.
Go back one screen:
Press
LEFT
when the cursor is at the left edge of the screen.
Go forward one screen:
Press
RIGHT
when the cursor is at the right edge of the screen.
Select a highlighted item:
Press
SELECT
.
Main Menu
The RETevet™ device main menu has a top status bar, four buttons and at the bottom a description of the currently-selected
protocol. The status bar shows the time, date, and battery charge state. The four buttons enable the operator to start a new
test, view previous results, change system settings, and choose the protocol that will run when starting a new test. At the
bottom of the screen, the currently selected protocol is displayed.
Settings
Set up the RETevet™ device for use in your practice.
1. Turn on the device.
The device goes through a brief internal test and initialization.
2. Select Settings.
3. Adjust each setting as you prefer.
Language
Use the joystick to scroll through the languages and select the one you want to use for the device’s user interface and PDF
reports.
If you select a right-to-left language (i. e., Arabic), the
RIGHT
and
LEFT
joystick directions are swapped from the description
in this manual.
