EGi Geoscan Скачать руководство пользователя страница 14

Страница: 14 / 115

FOR SCIENTIFIC RESEARCH PURPOSES

| 8100550-03

•

2018-10-26 | GeoScan User Manual

Support, Repairs, and Documentation

Electronic copies of EGI’s user manuals and instructions are available
for download at www.egi.com/knowledge-center or from the
Training and Technical Support tab at www.egi.com.

For articles that address the various procedural and theoretical aspects of sensor
localization, click the

Training and Technical Support

tab at www.egi.com.

•

The

Type

tab provides articles by:

−

application advice (usage, best
practices, workflows, etc.)

−

technical/troubleshooting/
help advice

−

implementation theory of
features and functions

−

theoretical background of dEEG,
sensor localization, source
localization, etc.

•

The

Products

tab provides

articles by product group.

•

The

Manuals

tab provides

product manuals by product
group.

•

The

Video Tutorials

tab

provides product and
instruction videos.

PERFORMANCE AND SUPPORT



Tested.

All components of your EGI system have been fully tested at the

factory and certified to meet performance standards prior to shipping.



Training.

To optimize your proficiency with your system, onsite training

can be provided by an EGI support or authorized engineer.



Questions.

At any time you have questions or wish additional training,

contact Philips Neuro Technical Support (Table P-2).

Содержание Geoscan




















































































































Результаты поиска

Содержание Geoscan

Отзывы:

EGi Geoscan, Руководство пользователя, Страница: 14 / 115

Результаты поиска

Содержание Geoscan

Отзывы: