EFI EB-34, Инструкция по установке и обслуживанию

Страница: 13 / 117

13 Installation and Service Guide: Printer Controller EB-34
Installing Hardware
Installing Hardware
This chapter includes the following topics:
•
Checking the customer site
•
Unpacking the EB-34
•
Connecting the EB-34
•
Completing installation and starting up
About the installation process
It is strongly recommended that you review this chapter before you install the EB-34. Also keep in mind that
installation problems are easier to avoid and diagnose if you proceed from the component level to the system level,
verifying functionality at each step.
Since the EB-34 is connected to the customer’s network, be sure to coordinate your installation schedule with the
network administrator at the customer site. For information about network setup, refer the network administrator to
Configuration and Setup , which is part of the user documentation set.
Note: You can change the default language that is preinstalled at the factory, if needed (see Changing the factory
default language on page 80).
To install the EB-34
1 Check installation requirements and verify site conditions.
If possible, obtain verification that the network is operational (see page 14 ).
2 Unpack the EB-34 (see page 16 ).
3 If applicable, connect the monitor, keyboard, mouse, and furniture to the EB-34.
For more information on setting up the furniture, see the documentation that comes with the furniture kit.