EFI EB-34, Инструкция по установке и обслуживанию, Страница: 21 / 117

21 Installation and Service Guide: Printer Controller EB-34
Installing Hardware
4 Wait for the EB-34 to power on and reach Idle.
The EB-34 takes approximately two minutes to power on and reach Idle.
5 Perform any required system software upgrades.
Updates to Fiery System and User Software may be available for the EB-34 from a variety of sources. For example,
System Updates (see page 87 ), updates provided on CD, or updates downloaded by the customer.
Microsoft Windows operating system updates should be obtained from Microsoft directly. Because such updates
are available directly from Microsoft, EFI does not maintain or provide them via the System Updates feature.
6 Print the Test Page and Configuration page and ask the customer to verify the output (see page 26 ).
Make sure that the correct date, time, and time zone are set. To change these settings, use Configure tool accessed
from Command WorkStation or WebTools. Start Configure, choose Fiery Server > Regional Settings . Check all the
settings under Date & Time , When you make changes on the settings, make sure to click Save , and reboot the EB-
34.
Note: When you access WebTools, a security certificate error occurs. A common security certificate that works for
all network environments cannot be installed on the EB-34, which results in the certificate error. This is expected
behavior. You can safely continue and proceed with your work.
7 If the EB-34 requires a static IP address (for example, in a non-DHCP network environment), work with the
network administrator to configure a static IP address (see page 20 ).
8 If needed, change the factory default language (see page 80 ).
9 Ask the network administrator to perform Setup and print some test documents over the network.
10 Store the output and the current Configuration page(s) near the copier.
11 Inform the site administrator that the EB-34 user software must be installed on networked computers that print to
the EB-34.
12 Ask the site administrator to make sure that all media (DVDs and/or CDs) shipped with the EB-34 are stored in a
safe location accessible to you.