16
Installation and Service Guide: Printer Controller EB-34
Installing Hardware
Unpacking the EB-34
The EB-34 is assembled and shipped from the factory with all necessary cables (except for the network cable) and
documentation. For shipping contents, see the
Packing List
.
To unpack the EB-34
It is strongly recommended that you save all packing materials in case you need them later (for example, if you discover
something is damaged and need to return it). Do not immediately discard packing materials.
1
Open the box and remove the packing material.
Save the original boxes and packing material in case you need to transport the EB-34 at a later date.
2
Remove the contents from the top accessory tray. Inspect the contents for visible damage.
3
Give the media pack to the customer or network administrator.
Let the customer or network administrator know that in order to take full advantage of the EB-34, the user software
must be installed on computers that will print to the EB-34.
4
Remove the top accessory tray and any packing material.
Set aside the packing material and note the orientation of the EB-34 inside the shipping container, in case you need
to repack it later.
5
Carefully lift the EB-34 out of the box.
If you notice shipping damage to any component, save the shipping container in case the carrier needs to see it.
Call the carrier immediately to report the damage and file a claim.
Warning:
Before you unpack the EB-34, it is strongly recommended that you review all
avoid injury or damage to the EB-34.
