EFI E-45, Инструкция по установке и обслуживанию, Страница: 113 / 126

113 Installation and Service Guide: Color Controller E-45
Troubleshooting
DVD drive
DVD drive is not
responding, cannot be
located, or the disk will
not eject. Possibly one of the following:
•
A disk is stuck in the DVD drive
•
Cable connections to the DVD drive
are loose or data cable is faulty
•
DVD drive is faulty
•
Motherboard is faulty
1 Press the eject button below the DVD slot on the front of
the E-45.
2 If the problem persists, check the cable connections to the
DVD drive (see page 50 ).
3 If the problem persists, you may need to replace the DVD
drive (see page 83 ).
4 If the problem persists, you may need to replace the
motherboard (see page 63 ).
System performance
System performs slowly
and/or hangs
periodically. Possibly one of the following:
•
Board or cable connections are
loose or faulty
•
System software is corrupted
•
Missing or faulty DIMM(s)
•
CPU is overheated or faulty
•
Motherboard is faulty
1 Recheck all cables and connections.
2 Make sure that the CPU is firmly seated in its socket and
that the fan cable is connected to the motherboard.
3 If the problem persists, restore the backup, or reinstall the
system software (see page 97 ).
4 Check for missing or faulty DIMM and reseat the DIMM
to remove any oxidation on the connector (see page 69 ).
5 If the problem persists, you may need to replace the
motherboard (see page 63 ).
Clock is slow. Missing or dead battery on the
motherboard Replace the battery on the motherboard and update the
time in the Windows (if a monitor is connected),
Command WorkStation, or WebTools.
page 97
Table 4:
E-45 error messages and condition (Continued)
Symptom Possible cause Suggested action