51
Installation and Service Guide: Color Controller E-45
Replacing parts
4
Remove all external panels necessary to access the component that you need to service.
At the minimum, you must remove the left panel to service the component. You may also need to remove other panels,
depending on the component that you need to access. For guidelines on which panels to remove, see the service
procedures that accompany a given component.
Note:
When removing multiple panels from the E-45, use the following order:
•
Left side panel
•
Right side panel
•
Front panel
•
Top panel with Fiery QuickTouch
5
Place the E-45 on a flat surface. Carefully position the E-45 so that it is standing in its normal position.
To remove the side panels
1
Remove the two screws at the bottom rear right of the chassis.
Figure 23:
Removing the left panel
2
From the back of the unit, slide the right side chassis cover toward the rear of the unit and remove.