background image

16

19

2% - 50:1

4% - 25:1

(cm

3

)

(cm

3

)

1
5

10
15
20
25

0,02
0,10
0,20
0,30
0,40
0,50

(20)

(100)
(200)
(300)
(400)
(500)

0,04
0,20
0,40
0,60
0,80
1,00

(40)

(200)
(400)
(600)
(800)

(1000)

20

17

p.n. 4175158

18

001001533

001001364

001001363

001001534

Italiano

English

Français

AVVIAMENTO

STARTING

MISE EN ROUTE

CARBURANTE
Questo prodotto è azionato da un motore a 2 tempi e richiede la 

premiscelazione di benzina e olio per motori a 2 tempi.  Premiscelare la 

benzina senza piombo e l’olio per motori a due tempi in un contenitore 

pulito approvato per la benzina (Fig.17). 

CARBURANTE CONSIGLIATO: QUESTO MOTORE È CERTIFICATO PER 

FUNZIONARE CON BENZINA SENZA PIOMBO PER USO AUTOMOBILISTICO A 

89 OTTANI ([R + M] / 2) O CON UN NUMERO MAGGIORE DI OTTANI (Fig.18).

Miscelare l’olio per motori a 2 tempi con la benzina secondo le istruzioni 

sulla confezione.

Consigliamo di usare olio per motori a 2 tempi Efco al 2% (1:50) formulato 

specificamente per tutti i motori a due tempi raffreddati ad aria Efco.

Le proporzioni corrette di olio/carburante indicate nel prospetto (Fig.19) 

sono idonee quando si usa olio per motori Efco PROSINT 2 e EUROSINT 2 

(Fig.20) o un olio motore di alta qualità equivalente (specifiche JASO FD 

o ISO L-EGD). Quando le specifiche dell’olio NON  sono equivalenti o non 

sono note, usare un rapporto di miscelazione olio/carburante del 4% (1:25).

  CAUTELA: NON USARE OLIO PER AUTOVEICOLI O OLIO PER 

MOTORI FUORIBORDO A 2 TEMPI.

  CAUTELA:

-  Acquistare solo il quantitativo di carburante necessario in base 

ai propri consumi; non acquistarne più di quanto se ne userà in 
uno o due mesi;

-  Conservare la benzina in un contenitore chiuso ermeticamente, 

in un luogo fresco e asciutto.

  CAUTELA - Per la miscela, non usare mai un carburante con 

una percentuale di etanolo maggiore del 10%; sono accettabili 
gasohol (miscela di benzina ed etanolo) con una percentuale di 
etanolo fino al 10% o carburante E10.

NOTA - Preparare solo la miscela necessaria all’uso; non lasciarla nel 

serbatoio o tanica per molto tempo. Si consiglia l’utilizzo di stabilizzatore 

per carburante Emak ADDITIX 2000 cod. 001000972, per conservare la 

miscela per un periodo di 30 giorni (Fig.21).

Benzina alchilata

  CAUTELA - La benzina alchilata non ha la stessa densità della 

benzina normale. Pertanto, i motori messi a punto con la benzina 
normale, possono richiedere una regolazione diversa della vite 
H. Per questa operazione è necessario rivolgersi ad un Centro 
Assistenza Autorizzato.

RIFORNIMENTO (Fig.23)
Agitare la tanica della miscela prima di procedere al rifornimento (Fig.22).

FUELING
This product is powered by a 2-cycle engine and requires pre-mixing 
gasoline and 2-cycle oil.  Pre-mix unleaded gasoline and 2-cycle engine oil 
in a clean container approved for gasoline (Fig.17).
RECOMMENDED FUEL: THIS ENGINE IS CERTIFIED TO OPERATE ON 
UNLEADED GASOLINE INTENDED FOR AUTOMOTIVE USE WITH AN OCTANE 
RATING OF 89 ([R + M] / 2) OR HIGHER (Fig.18).
Mix 2-cycle engine oil with gasoline according to the instructions on the 
package.
We strongly recommend the use of 2% (1:50) Efco two cycle engine oil, 
which is specifically formulated for all Efco air-cooled two-stroke engines.
The correct oil / fuel proportions shown in the table (Fig.19) are suitable 
when using the Efco PROSINT 2 and EUROSINT 2 (Fig.20) or an equivalent 
high-quality engine oil (JASO specification FD or ISO specification 
L-EGD)
.When oil specifications are NOT equivalent or unknown use 4% 
(1:25)
 oil / fuel mixing ratio.

  CAUTION: DO NOT USE AUTOMOTIVE OIL OR 2-CYCLE OUTBOARD 

OIL.

  CAUTION:

-  Match your fuel purchases to your consumption; don’t buy 

more than you will use in one or two  months;

-  Store gasoline in a tightly-closed container in a cool, dry place.

  CAUTION - For the mixture, never use a fuel with an ethanol 

percentage higher than 10%; gasohol  (mixture of gasoline and 
ethanol) up to 10% ethanol or E10 fuel are acceptable.

NOTE - Prepare only the quantity of mixture required for immediate use; do 
not leave fuel in the tank or a container for a long time. Were commend the 
use of the additive Emak ADDITIX 2000 code 001000972 if the mixture is 
to be stored for 30 days (Fig.21).

Alkylate gasoline

  CAUTIONS – Alkylate fuels have different density than normal 

fuel. Therefore engines, set with normal fuel, need different H jet 
regulation to avoid critical issues. For this operation it’s necessary 
turned at a Licensed Service Dealer.

FILLING THE TANK (Fig.23)
Stir the mixture well before refuelling (Fig.22).

CARBURANT

Cet appareil est actionné par un moteur 2 temps et nécessite le prémélange 

d'essence et d'huile pour moteurs 2 temps. Prémélangez l'essence 

sans plomb et l'huile pour moteurs 2 temps dans un récipient propre 

homologué pour contenir de l'essence (Fig.17). 

CARBURANT CONSEILLÉ : CE MOTEUR EST CERTIFIÉ POUR ÊTRE ALIMENTÉ 

EN ESSENCE SANS PLOMB POUR USAGE AUTOMOBILIE AVEC NIVEAU 

D'OCTANES 89 ([R + M] / 2) OU SUPÉRIEUR (Fig.18).

Mélangez l'huile pour moteurs 2 temps avec l'essence en suivant les 

instructions sur l'emballage.

Il est conseillé d'utiliser de l'huile pour moteurs 2 temps Efco à 2% (1:50) 

spécialement formulée pour tous les moteurs 2 temps refroidis par air Efco.

Les proportions correctes huile/essence illustrées dans la notice (Fig.19) 

sont adaptées à l'utilisation d'huile pour moteurs Efco PROSINT 2 et 

EUROSINT 2 (Fig.20) ou d'huile moteur de haute qualité équivalente 

(spécifications JASO FD ou ISO L-EGD). Quand les spécifications de l'huile 

NE SONT PAS équivalentes ou ne sont pas connues, utilisez un rapport de 

mélange huile/essence de 4% (1:25).

  ATTENTION : NE PAS UTILISER D'HUILE POUR AUTOMOBILES OU 

POUR MOTEURS HORS-BORD 2 TEMPS.

  ATTENTION :

-  N'achetez que la quantité de carburant nécessaire en fonction 

des consommations personnelles ; n'en achetez pas plus qu'il 

n'en sera utilisé en un ou deux mois ;

-   Conservez l'essence dans un récipient hermétique, dans un 

endroit frais et sec.

  ATTENTION - Pour le mélange, ne jamais utiliser un carburant 

dont le pourcentage d'éthanol dépasse 10% ; sont admis le 

gazole (mélange essence/éthanol) avec un pourcentage 

d'éthanol jusqu'à 10% ou le carburant E10. 

 

NOTA - Ne préparer que la quantité requise de mélange ; ne pas laisser 

le mélange dans le réservoir ou dans le bidon trop longtemps. Il est 

conseillé d’utiliser le stabilisateur pour carburant Emak ADDITIX 2000 réf. 

001000972 pour conserver le mélange pendant 30 jours (Fig.21). 

 

Essence alkylée 

  ATTENTION - L'essence alkylée ne présente pas la même densité 

que l'essence normale. Par conséquent, régler différemment la 

vis H des moteurs mis au point avec l'essence normale. Pour cette 

opération, s'adresser à un centre après-vente agréé. 

RAVITAILLEMENT (Fig.23)

Secouez le jerrycan du mélange avant de procéder au ravitaillement 

(Fig.22).

BENZINA - ESSENCE
GASOLINE - BENZIN

GASOLINA - BENZINE

OLIO - HUILE - OIL
ÖL - ACEITE - OLIE

Содержание MT 7200





























































Отзывы: