EDM Solution 4+4, Руководство по установке

Страница: 51 / 174

Turning Telephone Monitor Mode On/Off
Telephone monitor mode allows the remote codepad to be used for a visual representation of
data transmissions between the control panel and the base station receiver. The dialling
sequence is also shown in this mode.
The codepad will beep once every two seconds while telephone monitor mode is turned on
regardless of whether the system is in Installer's Programming Mode or normal operating
mode. The first five indicators are used to display the progressive steps for a transmission to
the base station receiver.
Zone Indicator Dialling Event
1
Telephone Line Seized
2 Dialling Phone Number
3 Handshake Received
4 Data Is Being Transmitted
5
Kiss-Off Received
None Telephone Line Released
Table 23: Telephone Monitor Mode Indications
How To Turn Telephone Monitor Mode On
1. Enter your followed by
7
and the button.
Three beeps will be heard.
+
7
+
How To Turn Telephone Monitor Mode Off
1. Enter your followed by
7
and the button.
Two beeps will be heard.
+
7
+
Reserved
Send Test Report
This function will force the control panel to send a test report which is used to test the dialling
and reporting capabilities of the system without causing the sirens to sound.
How To Initiate A Test Report
1. Enter your followed by
9
and the button.
Three beeps will be heard.
+
9
+
7
8
9
System Functions 51
Electronics Design and Manufacturing Pty Limited ISSUE123.DOC