98
Practical Use of the PR-80
To Assign Clips to All of the MIDI Keyboard Keys
1.
Check the “Note Mode” check box in “Clip Control” from Step 3 above, then check “Set Key
Range.”
2.
Click “Set from MIDI” to highlight it.
3.
Specify the range of notes with the MIDI keyboard connected to the PR-80.
Hold down the key for the lowest pitch and press the key for the highest pitch. The specified range
is displayed.
The clips corresponding to the notes within this range are assigned to the keys.
Mark the checkbox
[Set from MIDI] button
Range of notes
Setting the Clip Retrigger Point
When the same white key is held down, the same clip is repeatedly played (retriggered) from the
beginning of the clip (or the In point). You can preset the starting point at which the repeated
playback begins (the retrigger point).
1.
Hold down a white key for at least one second.
2.
View the clip as it is played back, then release the key when the clip reaches the point that
you want to set as the retrigger point.
3.
The clip is played again either when playback reaches the end of the clip or when you
press the same key before switching to another clip.
The retrigger point is cleared when playback reaches the end of the clip or when you switch to
another clip.
After setting a retrigger point, you can set it again by holding down the same key for at least one
second.
Retriggering with the transition effect time setting enabled may result in fading out of the functions,
making the effect unclear.
PR-80_e.book 98 ページ ２００５年１月６日 木曜日 午後９時２２分
