89
Practical Use of the PR-80
1.
If you're in the Play mode, click the [Preferences] button and then the [MIDI Preferences]
button. If you're in the Edit mode, click the [Preferences] button.
If you're in the Play mode, click the [Preferences] button, and when the panel appears, click the [MIDI
Preferences] button.
2.
Set the MIDI channel to be used for playback of the clip in “Rx Channel” in “Clip Control.”
fig.midi01.eps
3.
If controlling the playback speed via MIDI, set the MIDI message to be used in “Speed
Control” (controls are not accepted via MIDI when this is set to [OFF]).
The playback speed is controlled with the selected MIDI message.
fig.midi02.eps
When controlling the playback speed, set the “Speed Control Range” (the value is set in terms of a
range of multipliers that can be applied to the standard speed).
fig.midi03.eps
Numerals in the “Speed Control Range” indicate, from left to right, the minimum MIDI value (0),
center value (64), and maximum value (127). When selecting a range starting from 0 in the “Speed
Control Range,” playback is paused when the value is set at 0.
Select the RX channel
Select a MIDI message
Speed Control Range
PR-80_e.book 89 ページ ２００５年１月６日 木曜日 午後９時２２分
