112
Practical Use of the PR-80
Automatically Starting Up Presenter
1.
Click the [System Preferences] button in Selector.
The System Preferences screen appears.
2.
Select the “Boot up method” setting.
• [Launch Presenter automatically]
When you turn on the power to the PR-80, it automatically starts up Presenter in Play mode.
• [Launch Editor automatically]
When you turn on the power, the Editor automatically starts up.
• [Wait indefinitely]
After the power is turned on, the PR-80 stands by in Selector.
3.
Click the [Done] button
Using an External Power Switch to Turn the Power On and Off
1.
Click the [System Preferences] button in Selector.
The System Preferences screen appears.
2.
Select “Turn On/Off using External power-line switch.”
3.
Click the [Done] button
You can then use the power switch of the device to which the PR-80’s power cord is connected to turn
the PR-80’s power on and off.
When turning off the power, click the [Power off] button in the screen. Then, once the dialog “It’s now
safe to turn off the computer.” is displayed, turn off the power to the device.
fig.shutdown.eps
When turning off the power externally after transmitting a QT (Quit) command via RS-232C, be sure
to wait until this dialog is displayed.
You can turn off the power to the unit by switching off the power to a touch-panel display. For more
information, refer to "Making the Touch Panel Display Settings" (p. 116).
PR-80_e.book 112 ページ ２００５年１月６日 木曜日 午後９時２２分
