Edge-Core ECS4110-28T, Руководство по управлению, Страница: 813 / 1514

C
HAPTER
22
| SNMP Commands
Additional Trap Commands
– 813 –
show snmp
notify-filter
This command displays the configured notification logs.
C
OMMAND
M
ODE
Privileged Exec
E
XAMPLE
This example displays the configured notification logs and associated
target hosts.
Console#show snmp notify-filter
Filter profile name IP address
---------------------------- ----------------
A1 10.1.19.23
Console#
Additional Trap Commands
memory
This command sets an SNMP trap based on configured thresholds for
memory utilization. Use the no form to restore the default setting.
S
YNTAX
memory { rising rising-threshold | falling falling-threshold }
no memory { rising | falling }
rising-threshold - Rising threshold for memory utilization alarm
expressed in percentage. (Range: 1-100)
falling-threshold - Falling threshold for memory utilization alarm
expressed in percentage. (Range: 1-100)
D
EFAULT
S
ETTING
Rising Threshold: 90%
Falling Threshold: 70%
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
Once the rising alarm threshold is exceeded, utilization must drop beneath
the falling threshold before the alarm is terminated, and then exceed the
rising threshold again before another alarm is triggered.
E
XAMPLE
Console(config)#memory rising 80
Console(config)#memory falling 60
Console#
R
ELATED
C
OMMANDS
show memory (728)