Edge-Core ECS4110-28T, Руководство по управлению, Страница: 1256 / 1514

C
HAPTER
40
| Multicast Filtering Commands
IGMP Filtering and Throttling
– 1256 –
reached on a port, the switch can take one of two actions; either “deny”
or “replace.” If the action is set to deny, any new IGMP join reports will
be dropped. If the action is set to replace, the switch randomly
removes an existing group and replaces it with the new multicast
group.
◆
IGMP throttling can also be set on a trunk interface. When ports are
configured as trunk members, the trunk uses the throttling settings of
the first port member in the trunk.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#ip igmp max-groups 10
Console(config-if)#
ip igmp max-groups
action
This command sets the IGMP throttling action for an interface on the
switch.
S
YNTAX
ip igmp max-groups action { deny | replace }
deny - The new multicast group join report is dropped.
replace - The new multicast group replaces an existing group.
D
EFAULT
S
ETTING
Deny
C
OMMAND
M
ODE
Interface Configuration (Ethernet)
C
OMMAND
U
SAGE
When the maximum number of groups is reached on a port, the switch can
take one of two actions; either “deny” or “replace.” If the action is set to
deny, any new IGMP join reports will be dropped. If the action is set to
replace, the switch randomly removes an existing group and replaces it
with the new multicast group.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#ip igmp max-groups action replace
Console(config-if)#