manualshive.com logo in svg

Edge-Core ECS4110-28T, Руководство по управлению, Страница: 1356 / 1514

Поделиться
Скачать
Edge-Core ECS4110-28T Скачать руководство пользователя страница 1356

C

HAPTER

 42

  |  CFM Commands

Defining CFM Structures

–  1356  –

ma index name

This command creates a maintenance association (MA) within the current 

maintenance domain, maps it to a customer service instance (S-VLAN), 

and sets the manner in which MIPs are created for this service instance. 

Use the 

no

 form with the 

vlan

 keyword to remove the S-VLAN from the 

specified MA. Or use the 

no

 form with only the 

index

 keyword to remove 

the MA from the current domain.

S

YNTAX

ma index

 

index

 

name

 

ma-name

 [

vlan

 

vlan-id

 [

mip-creation

 

type

]]

no ma index

 

index

 [

vlan

 

vlan-id

]

index – 

MA identifier. (Range: 1-2147483647)

ma-name – 

MA name. (Range: 1-43 alphanumeric characters)

vlan-id

 - Service VLAN ID. (Range: 1-4094) 

type 

– Specifies the CFM protocol’s creation method for 

maintenance intermediate points (MIPs) in this MA:

default

 – MIPs can be created for this MA on any bridge port 

through which the MA’s VID can pass.

explicit

 – MIPs can be created this MA only on bridge ports 

through which the MA’s VID can pass, and only if a maintenance 

end point (MEP) is created at some lower MA Level.

none

 

– No MIP can be created for this MA. 

D

EFAULT

 S

ETTING

 

10 seconds

C

OMMAND

 M

ODE

 

CFM Domain Configuration

C

OMMAND

 U

SAGE

 

◆

The maintenance domain used to enter CFM domain configuration 

mode, the MA name and VLAN identifier specified by this command, 

and the DSAPs configured with the 

mep crosscheck mpid

 

command 

create a unique service instance for each customer.

◆

If only the MA index and name are entered for this command, the MA 

will be recorded in the domain database, but will not function. No MEPs 

can be created until the MA is associated with a service VLAN.

◆

Note that multiple domains at the same maintenance level (see the 

ethernet cfm domain

 command) cannot have an MA on the same VLAN. 

Also, each MA name must be unique within the CFM-managed network.

◆

Before removing an MA, first remove all the MEPs configured for it (see 

the 

mep crosscheck mpid

 command).

◆

If the MIP creation method is not defined by this command, the 

creation method defined by the 

ethernet cfm domain

 command is 

applied to this MA. For a detailed description of the MIP types, refer to 

the Command Usage section under the 

ethernet cfm domain

 command.

Содержание ECS4110-28T











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов