Edge-Core ECS4110-28T Скачать руководство пользователя страница 134

Страница: 134 / 1514

HAPTER

| Basic Management Tasks

Managing System Files

– 134 –

◆

The FTP connection is made with PASV mode enabled. PASV mode is

needed to traverse some fire walls, even if FTP traffic is not blocked.

PASV mode cannot be disabled.

◆

The switch-based search function is case-insensitive in that it will

accept a file name in upper or lower case (i.e., the switch will accept

ECS4110-SERIES.BIX

from the server even though

ECS4110-series.bix

was requested). However, keep in mind that the file systems of many

operating systems such as Unix and most Unix-like systems (FreeBSD,

NetBSD, OpenBSD, and most Linux distributions, etc.) are case-

sensitive, meaning that two files in the same directory,

ecs4110-

series.bix

and

ECS4110-series.bix

are considered to be unique files.

Thus, if the upgrade file is stored as

ECS4110-SERIES.bix

(or even

ECS4110-series.bix

) on a case-sensitive server, then the switch

(requesting

ecs4110-series.bix

) will not be upgraded because the

server does not recognize the requested file name and the stored file

name as being equal. A notable exception in the list of case-sensitive

Unix-like operating systems is Mac OS X, which by default is case-

insensitive. Please check the documentation for your server’s operating

system if you are unsure of its file system’s behavior.

◆

Note that the switch itself does not distinguish between upper and

lower-case file names, and only checks to see if the file stored on the

server is more recent than the current runtime image.

◆

If two operation code image files are already stored on the switch’s file

system, then the non-startup image is deleted before the upgrade

image is transferred.

◆

The automatic upgrade process will take place in the background

without impeding normal operations (data switching, etc.) of the

switch.

◆

During the automatic search and transfer process, the administrator

cannot transfer or update another operation code image, configuration

file, public key, or HTTPS certificate (i.e., no other concurrent file

management operations are possible).

◆

The upgrade operation code image is set as the startup image after it

has been successfully written to the file system.

◆

The switch will send an SNMP trap and make a log entry upon all

upgrade successes and failures.

◆

The switch will immediately restart after the upgrade file is successfully

written to the file system and set as the startup image.

ARAMETERS

The following parameters are displayed:

◆

Automatic Opcode Upgrade

– Enables the switch to search for an

upgraded operation code file during the switch bootup process.

(Default: Disabled)

Содержание ECS4110-28T











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ECS4110-28T

Отзывы:

Edge-Core ECS4110-28T, Руководство по управлению, Страница: 134 / 1514

Результаты поиска

Содержание ECS4110-28T

Отзывы: