Edge-Core ECS4110-28T, Руководство по управлению, Страница: 707 / 1514

C
HAPTER
19
| Using the Command Line Interface
CLI Command Groups
– 707 –
General Security
Measures
Segregates traffic for clients attached to common data
ports; and prevents unauthorized access by configuring
valid static or dynamic addresses, web authentication,
MAC address authentication, filtering DHCP requests and
replies, and discarding invalid ARP responses
889
Access Control List Provides filtering for IPv4 frames (based on address,
protocol, TCP/UDP port number or TCP control code),
IPv6 frames (based on address, DSCP traffic class, or
next header), or non-IP frames (based on MAC address
or Ethernet type)
969
Interface Configures the connection parameters for all Ethernet
ports, aggregated links, and VLANs
995
Link Aggregation Statically groups multiple ports into a single logical trunk;
configures Link Aggregation Control Protocol for port
trunks
1021
Power over Ethernet *
Configures power output for connected devices 1035
Mirror Port Mirrors data to another port for analysis without affecting
the data passing through or the performance of the
monitored port
1045
Congestion Control Sets the input/output rate limits, traffic storm thresholds,
and thresholds for broadcast and multicast storms which
can be used to trigger configured rate limits or to shut
down a port.
1055
Address Table Configures the address table for filtering specified
addresses, displays current entries, clears the table, or
sets the aging time
1085
Spanning Tree Configures Spanning Tree settings for the switch 1091
ERPS Configures Ethernet Ring Protection Switching for
increased availability of Ethernet rings commonly used in
service provider networks
1119
VLANs Configures VLAN settings, and defines port membership
for VLAN groups; also enables or configures private
VLANs, protocol VLANs, voice VLANs, and QinQ tunneling
1149
Class of Service Sets port priority for untagged frames, selects strict
priority or weighted round robin, relative weight for each
priority queue, also sets priority for DSCP
1195
Quality of Service Configures Differentiated Services 1207
Multicast Filtering Configures IGMP multicast filtering, query, profile, and
proxy parameters; specifies ports attached to a multicast
router; also configures multicast VLAN registration, and
IPv6 MLD snooping
1225
Link Layer Discovery
Protocol Configures LLDP settings to enable information discovery
about neighbor devices
1323
Connectivity Fault
Management
Configures connectivity monitoring using continuity
check messages, fault verification through loopback
messages, and fault isolation by examining end-to-end
connections between Provider Edge devices or between
Customer Edge devices
1347
OAM Configures Operations, Administration and Maintenance
remote management tools required to monitor and
maintain the links to subscriber CPEs
1389
Domain Name Service Configures DNS services. 1401
Dynamic Host
Configuration Protocol
Configures DHCP client functions 1411
Table 50: Command Group Index (Continued)
Command Group Description Page