Edge-Core ECS4110-28T, Руководство по управлению, Страница: 710 / 1514

C
HAPTER
20
| General Commands
– 710 –
C
OMMAND
U
SAGE
This command and the hostname command can be used to set the
command line prompt as shown in the example below. Using the no form
of either command will restore the default command line prompt.
E
XAMPLE
Console(config)#prompt RD2
RD2(config)#
reload
(Global Configuration)
This command restarts the system at a specified time, after a specified
delay, or at a periodic interval. You can reboot the system immediately, or
you can configure the switch to reset after a specified amount of time. Use
the cancel option to remove a configured setting.
S
YNTAX
reload { at hour minute [{ month day | day month } [ year ]] |
in { hour hours | minute minutes | hour hours minute minutes } |
regularity hour minute [ period { daily | weekly day-of-week |
monthly day }] | cancel [ at | in | regularity ]}
reload at - A specified time at which to reload the switch.
hour - The hour at which to reload. (Range: 0-23)
minute - The minute at which to reload. (Range: 0-59)
month - The month at which to reload. (january ... december)
day - The day of the month at which to reload. (Range: 1-31)
year - The year at which to reload. (Range: 1970-2037)
reload in - An interval after which to reload the switch.
hours - The number of hours, combined with the minutes,
before the switch resets. (Range: 0-576)
minutes - The number of minutes, combined with the hours,
before the switch resets. (Range: 0-59)
reload regularity - A periodic interval at which to reload the
switch.
hour - The hour at which to reload. (Range: 0-23)
minute - The minute at which to reload. (Range: 0-59)
day-of-week - Day of the week at which to reload.
(Range: monday ... saturday)
day - Day of the month at which to reload. (Range: 1-31)
reload cancel - Cancels the specified reload option.
D
EFAULT
S
ETTING
None