EDAN Acclarix AX15, Руководство пользователя

Страница: 122 / 149

Acclarix AX3 Series Diagnostic Ultrasound System User Manual Utilities
- 116 -
Wireless Settings :
Enable Wireless : This will turn the wireless radio on/off. No wireless networks are displayed
when this is disabled.
Networks : When wireless is enabled the system will search for wireless networks that are
available and display them in this list. Networks that have been previously accessed will show
up with an
asterisk (“*”). If there is currently an active network it will show up with a checkmark
(„√‟). If the network requires a password it shows up with a lock icon. Each displayed network
shows the strength of the wireless signal.
Refresh : Clicking on this button updates the list of displayed networks.
The following controls require that a wireless network has been selected from the network list.
Click on the name of a network to select it.
Join : This joins the selected network. If a password is needed a dialog box will be displayed to
enter it.
Forget Network : This forgets any password of the selected network that had been entered, but
the network is still shown in the list.
Advanced Settings : This brings up a dialog box with additional settings for the selected wireless
network. The dialog box includes the following:

Password : This is useful when the network password has changed.

Method : Either Manually entered (Static) or DHCP. Generally wireless networks use
DHCP, and a Static address is only needed if required by the target PACS system.

IP Address, Subnet Mask, Gateway, DNS: If you chose DHCP then your network router
will set these automatically. If you chose Manually Entered IP then contact your network
IT manager for the appropriate settings.
11.2.2. DICOM
This screen configures DICOM services, including Store and Modality Worklist.
Figure 11-7 DICOM Settings