EDAN Acclarix AX15 Скачать руководство пользователя страница 106

Страница: 106 / 149

Acclarix AX3 Series Diagnostic Ultrasound System User Manual Exam Data Management

- 100 -

Export Format

This location displays export format for static images and clips. BM

P, Raw Data

and DICOM formats

are available for static images. AVI, Raw Data and DICOM formats are available for clips.

Note: Cine clips are not supported to export in AVI and DICOM formats for this release.

Send

Pressing this button will send the selected exam(s) to the destination. This button is available when

one or more exams are selected.

Working with one study:

A study is selected by clicking on it. When a study is selected thumbnail images from that study are

shown on the right side of the screen. Operations such as reviewing and restarting of the selected

study can be accessed on the touch screen.

A study can also be send to a DICOM server, saved to a USB device, or deleted. If the study has been

copied to either a server or to a USB device a small disk icon appears next to it, indicating that it has

been saved.

CAUTION



Studies stored on the system hard drive should be archived regularly. The system is not

intended for long term storage of patient information. Confirm successful archiving before

deleting a study from the hard drive.

Working with multiple studies

Multiple studies can be selected by clicking the small box at the left of each listed study. Multiple

studies can be stored to a DICOM server, saved to a USB device or deleted. Only one study can be

reviewed at a time.

9.4 Archiving Studies

All Clips and Static images stored on the system are stored internally in Raw Data format. They can

be archived to other storage device for long-term storage in .bmp, .avi, .dcm and Raw Data formats as

described below.



The study can be sent to a DICOM server. In this case the images are in DICOM (.dcm)

format.



The study can be saved to an USB. In this case the images can be stored as either DICOM,

Raw Data or .bmp/.avi format.

Note: Cine clips are not supported to export in AVI and DICOM formats for this release.

Sending a study to DICOM server:

1. Configure a DICOM server. See Section 11.2.2 for details.

2. From the exam database screen, select a study or multi-studies.

3. Select a configured DICOM server from the

Destination

drop-down list.

4. Press

Send

Saving a study to USB

1. Plug the device into a USB port.

2. From the exam database screen, select a study or multi-studies.

3. Select the USB device from the

Destination

drop-down list.

4. Select the Export Formats and Press

Send

Содержание Acclarix AX15






















































































































































Результаты поиска

Содержание Acclarix AX15

Отзывы:

Похожие инструкции для Acclarix AX15

Бренды по названию

Популярные бренды

EDAN Acclarix AX15, Руководство пользователя

Результаты поиска

Содержание Acclarix AX15

Отзывы:

Похожие инструкции для Acclarix AX15

Бренды по названию

Популярные бренды