Ecom EN2-F Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 40

Ecom EN2-F Скачать руководство пользователя страница 30

Page 30

Probe and tubing

Depending  on  the  frequency  of  use,  probe  and  tubing  should  be
regularly cleaned in order to release particle deposits and to prevent
early wearing due to corrosion.
- Release the connections at the instrument and at the probe grip
  to free the tubing.
- Clean it (flow warm water in then dry respectively blow water
  drops out.
- Slightly grease the O-rings of the tubing connections from time to
  time with acid-free grease.

Change printer paper roll

- Release the printer cover (press lock downwards).
- If necessary, extract the paper rest out of the printer. Hereto select

"Adjustments"

/

"Paper feed"/<Enter>

).

- Remove the plastics tube of the previous roll.
- Insert the paper end in the slot under the transport roll (paper roll
  inner side facing you while inserting the paper).
- Convey approx. 3 cm paper thru the printer
  (

"Adjustments"

/

"Paper feed"

/

<Enter>

).

- Lay the paper roll in the corresponding hollow.
- Insert the paper thru the slot of the printer compartment cover
  and close the latest.

Unlocking

printer cover

«
...
28
29
30
31
32
...
»

Содержание EN2-F









































Отзывы:

Нет отзывов