13
Programming the Water Softener
Recharge
Salt settings
Basic settings
Main menu
FIG. 23
MAIN MENU
During normal operation (status screens rolling), press
the softener’s SELECT (
¡
) button to display the Main
menu (See Figure 23). This menu and its subsidiary
screens are used to control these operations:
=
Recharge
(See Page 16)
=
Salt settings
=
Salt level
(See Page 15)
=
Low salt alarm
(See Page 15)
=
Salt type
(See Page 15)
=
Basic settings
=
Current time
(See Page 16)
=
Hardness
(See Page 17)
=
Iron level
(See Page 17)
=
Recharge time
(See Page 17)
=
Rolling screens
(See Page 18)
=
User preferences
=
Language
(See Page 18)
=
Time format
(See Page 19)
=
Volume units
(See Page 19)
=
Hardness units
(See Page 19)
=
Weight units
(See Page 19)
=
System information
=
Model information
(See Page 20)
=
Water available
(See Page 20)
=
Daily avg. water used
(See Page 20)
=
Water used today
(See Page 20)
=
Total water used
(See Page 20)
=
Current water flow
(See Page 20)
=
Days powered up
(See Page 20)
=
Last recharge
(See Page 20)
=
Total recharges
(See Page 20)
=
Advanced settings
=
Cycle times
=
Backwash time
(See Page 21)
=
2nd backwash (On/Off)
(See Page 21)
=
2nd backwash time
(See Page 21)
=
Fast rinse time
(See Page 21)
=
Special features
=
Efficiency mode
(See Page 22)
=
Max. days between recharges
(See Page 22)
=
Auxiliary control
(See Page 23)
=
Chemical feed volume*
(See Page 23)
=
Chemical feed timer*
(See Page 23)
=
97% feature
(See Page 22)
=
Service reminder
(See Page 24)
=
Troubleshooting
=
Diagnostics
(See Page 25)
=
Setup changes
(See Page 25)
* Only displayed if Auxiliary control is set to Chemical
feed.
