6
FIG. 4
Soft Water
OUT
INSTALLATION USING SINGLE BYPASS VALVE
MAIN WATER PIP
E
Hard
Water
IN
INSTALLATION USING 3-VALVE BYPASS
MAIN WATER PIP
E
BYPASS
Valve
OUTLET
Valve
INLET
Valve
For soft water SERVICE:
-Open the inlet and outlet
valves
For hard water BYPASS:
-Close the inlet and outlet
valves
-Open the bypass valve
CROSS-OVER
Use if water supply flows from the left.
Include single or 3-valve bypass.
HARD
WATER
TO SOFTENER
INLET
SOFT
WATER
FROM SOFTENER
OUTLET
Bypass Valve
1-1/2”
Air Gap
1-1/2”
Air Gap
1-1/2” Air Gap
LAUNDRY
TUB
SUMP
STAND
PIPE
To standpipe, sump, laundry tub or other suitable drain.
1-1/2”
Air Gap
FLOOR
DRAIN
Brine Tank
Overflow
Hose**
Secure Valve Drain Hose
in place over Floor Drain
Valve
Drain
Hose
*Included with softener - Pipe and fittings supplied by installer.
**Do not connect the water softener valve drain hose to the brine
tank overflow hose.
120V,
60 Hz
Outlet
INLET
OUTLET
OUTLET
Typical Installation Illustrations
CONNECTING A RIGID VALVE DRAIN TUBE
Compression Fitting.
1/4 NPT x 1/2” O.D.
Tube (not included)
Clip
Barbs
1/4 NPT Threads
1/2” Outside Dia. Copper
Tube (not included)
Cut barbs from drain fitting (pull
clip to remove fitting from valve)
Hard Water to
Outside Faucets
1” NPT Installation
Adaptor (2)*
Clip (2)*
O-Ring Seal (2)*
1” NPT
Female Adaptor (2)
not included
INLET
O-Ring Seal (2)*
1” NPT
Female Adaptor
(2) not included
1” NPT Installation
Adaptor (2)*
Clip (2)*
