ENGLISH
Translation of the original German user manual
36
3.2.
Technical data
Voltages:
EU: 230 V
Frequency:
EU: 50 Hz
UK: 230 V
UK: 50 Hz
NZ: 230 V
NZ: 50 Hz
AU: 230 V
AU: 50 Hz
US: 115 V
US: 60 Hz
JP: 100 V
JP: 50/ 60 Hz
Power:
1.600 W
Water tank:
ca. 3,0 Liter
Measurements:
B x T x H / 275 mm x 445 mm x 405 mm
Measurements with portafilter:
B x T x H / 325 mm x 580 mm x 390 mm
Weight:
23,5 kg
4.
MACHINE INSTALLATION
The installation is to be carried out exclusively by a qualified specialist in compliance with
valid laws and according to the local regulations, technical requirements and standards.
4.1.
Preparation for installation
•
Place the machine on an even and stable surface.
•
Make sure that the machine is on a water-resistant surface
in case of water spillage or
leakage.
•
Never place the machine on hot surfaces.
4.2.
Electrical connection
•
Make sure that the local main voltage supply corresponds to the information given on
the type plate on the front panel of the espresso machine.
•
Make sure that you use the correct power plug for your country.
•
Plug the machine into a grounded socket only and do not leave it unattended.
•
Do not roll or bend the power cord.
•
Do not use an extension cord / do not use a multiple socket.
4.3.
Water supply connection
Important
Make sure that the machine is on a water-resistant surface in case of water spillage or
leakage.
Make sure that the fixed water connection of your machine is connected to a potable water
supply having an operating pressure ranging between 0 and 1.5 bars. We recommend to use
a pressure regulator and
a shut-off valve
in case the operating pressure exceeds 1.5 bars or
frequently fluctuates. The shut-off valve should be easily accessible, so that the water flow
may be stopped at any time.
Make sure that the shut-off valve is closed or turned off when the machine is not in use
to
prevent any possible water leakage.
Caution!
High water pressure can result in damages to property and machine. Please make sure the
water pressure does not exceed 2 bar.
4.3.1.
Machine in use with direct water connection
The water connecting hose is to be connected to the water supply adapter under the machine (image 1).
Always use the hose supplied with the machine
to connect the machine to the water supply system, even if
an old hose is already present.
