ECKELMANN UA 410 L Case Controller, Инструкция по эксплуатации

Страница: 78 / 92

Menu Structure of UA 410 L
72
Firmware V1.50 - Doku 2.0 06. April 2016
Following selection, the following menu will appear:
Temp. Rx.y POS: XXXXX
dd.mm.yy hh:mm
Time of archiving Record 1
Zone 1: ab x °C
Status and temperature of Zone 1, see Note *)
*) Status ab covers following states of the refrigeration point. Display will be ”-- ” if state is not active.
Status
a R = Cooling (with sensors Rx.1 .. Rx.5 only)
b A = Alarm
8.8 Menu 6 Configuration
CONFIGURAT POS: XXXXX
1 Refriger. Point
Move to menu 6-1
2 Controller
Move to menu 6-2
3 Language
Move to menu 6-3
S
Menu 6-1 Refriger. Point
REFR. PT. POS: XXXXX
Entry Default
Refr. Pt. Name:
Text only
xxxxxxxxxxxxxxx
Free text entry describing refrigeration point (see note follo­
wing table) Case control­
ler
Item ID: XXXXX
Free text entry displayed in screens after POS ID (see
note following table) UA400
Priority: XX
Alarm priority in failure of refrigeration point 1
Sensor Fault XXX
Sensor break alarm delay 0..15 0m
No. Sensors XX
Number of temperature sensors connected. After entering
↵
sensor scan is performed to redetermine the number of
sensors.
↵
A meaningful name that describes the refrigeration point in more detail should be entered, e.g.
Cheese Counter 2 and CC2. The input is made using the menus of the system centre, store com­
puter, operator terminal or the BT 300 operator interface.