ECKELMANN UA 410 L Case Controller, Инструкция по эксплуатации

Страница: 67 / 92

Operation of UA 410 L
61 Firmware V1.50 - Doku 2.0 06. April 2016
Menus
A menu can contain up to ten menu items (0 .. 9; 0 for menu item 10). After the selection of a menu item using
the cursor buttons (
↑
) and (
↓
) and by tapping the ENTER button (
↵
) or by tapping the buttons 0..9), other sub­
menus or operating screens are displayed.
Selection of the menu items
Each line of this selection list in the display has a digit between 1 and 9 and 0 for menu item 10 with the associ­
ated name of the corresponding menu item. The various menu items can be selected directly by tapping the
digit buttons 0 .. 9.
If a menu provides more than 3 submenus, the cursor buttons (
↑
) and (
↓
) can be used for paging in the menu to
display the remaining menu items.
A menu item can be selected by pressing the respective numeric key regardless of whether the item
itself is visible on the display.
Screens
An operating screen shows values for output and/or input. There may be more values for output and/or input
than fit into the display at one time. The cursor keys can be used to scroll through these additional values. The
screen may also contain more than one page, in which case the pages can be viewed one at a time.
Arrows appear on the right of the display to indicate whether you can scroll or page through a menu
or screen.
Scrolling
Using the cursor buttons (
↑
) and (
↓
)
‐ scrolling can be line by line, e.g. for selection of a variable in a line from a list of predefined variables.
‐ scrolling can be block by block so that values can be shown that cannot be displayed with the others due to
the limited capacity of the display
Paging
If an operating screen contains multiple pages (e.g. the alarm list), these can be paged through using the cursor
buttons (
←
) and (
→
). In menus that provide more than 3 submenus, these can be paged through using the
cursor buttons (
↑
) and (
↓
) to display the remaining menu items.
MODE + 9 three lines upwards and
MODE + 3 three lines downwards
Input of values and text
Select the required line using the cursor buttons (
↑
) and (
↓
) and then tap the ENTER button (
↵
). The cursor
jumps to the input field. Values can now be entered and changed using the cursor buttons (
↑
) and (
↓
) or digit
buttons.
If the cursor buttons (
↑
) and (
↓
) are kept pressed, the adjustment is made in high speed mode.
Deleting input text
The MODE button and - must be pressed simultaneously to delete the complete text line.
A character is deleted using the button combination MODE and , .
Cancelling of an entry
The entry of a value can be cancelled by tapping the ESC button. The value is not applied.