ECKELMANN UA 410 L Case Controller, Инструкция по эксплуатации

Страница: 45 / 92

Installation and Startup of UA 410 L
39 Firmware V1.50 - Doku 2.0 06. April 2016
Do not touch the new battery with metal pliers, as it might be short-circuited and destroyed:
- wipe the new battery with a clean, dry cloth,
- do
not touch the contact faces on the edges of the new battery.
Never dispose of this product with other household waste. Please inform yourself of the local regula­
tions for the separate disposal of electrical and electronic products. The correct disposal of your old
equipment will protect people and the environment from possible negative effects.
You will find further information in the chapter ”Decommissioning and Disposal”.
5. Then pull the battery from the battery holder and dispose of it in a proper manner.
6. Check that the lid is in the correct position and
push it down until it clicks into place.
7. Put device on the DIN rail and attach all connectors again.
Warning - hazardous electrical voltage!
Danger of electric shock!
Some connectors may carry 230 V AC power. Connectors should be
marked before disconnecting.
8. Turn on power to the case controller and refrigeration point, which will then resume working.
9. Controller in CAN bus system: With unchanged configuration of the system centre /
store computer, the controller is automatically detected again via the CAN bus; date, time and automatic
summer / winter time changeover are set automatically via the central time synchronisation.
10. Controller in standalone operation: The setting of date, time and automatic summer / winter time
changeover is required for the data archiving (Menu 3-1).