ECKELMANN Combi Скачать руководство пользователя | Manualshive

Страница: 33 / 58

background image

Installation and Startup of Combi Gateway

27

Version 1.6 04. November 2016

6.5.1.1 Structure of the configuration file

File name

: ”

ELDS_Combi_Gateway_Configuration.ini

”

Erstellung

:

The configuration file can be created and edited using any standard text editor (e.g. Notepad). It

must be strictly ensured that the following file structure is maintained.

Configuration file example:

The parameters marked as ”bold” must be adapted and the changes saved under

the file name

ELDS_Combi_Gateway_Configuration.ini

:

; Dateianfang #####################################

; E*LDS - Combi-Gateway Konfigurationsdatei
; CONFIGURATION FILE

;##############################################################################
; HINWEIS
; - Der Dateiname muss ELDS_Combi_Gateway_Configuration.ini heißen
; - Keine führende Nullen in der IP-Konfiguration (Bsp: 192.168.161.66)
; - Auf Tippfehler achten
; - Datei-Kodierung: ASCII text
; - Copyright 2015 - Eckelmann AG - Alle Rechte vorbehalten.

; NOTE
; - THE FILE MUST BE NAMED AS ELDS_Combi_Gateway_Configuration.ini
; - WITHOUT LEADING ZEROES IN THE IP Configuration (EXAMPLE: 192.168.161.66)
; - PAY ATTENTION TO TYPING ERRORS
; - FILE CODING: ASCII text
; - Copyright 2015 - Eckelmann AG - ALL RIGHTS RESERVED.
;##############################################################################

; Netzwerk-Konfiguration Ethernet Schnittstelle (RJ45)
; NETWORK CONFIGURATION ETHERNET INTERFACE (RJ45)

[network_eth0]
; IP-Adresse (anzupassen / TO BE EDITED)
ipAddress=

192.168.161.66

; Subnetzmaske (anzupassen / TO BE EDITED)
subnetMask=

255.255.255.0

; Standard-Gateway (anzupassen / TO BE EDITED)
standardGateway=

192.168.161.1

; Hostname (anzupassen / TO BE EDITED)
hostname=

elds-gateway

; Dateiende ########################################

The required parameters for the configuration file can be found in chapter 6.6.1.1 Network Settings

PRACTICAL TIP:

The configuration file can be downloaded and adapted afterwards using the fol

lowing link: https://edp.eckelmann.de/edp/lds/_M3uZco3pG2
The file is present as template) in the ZIP archive of the firmware and has the name there of

template_ELDS_Combi_Gateway_Configuration.ini

It is recommended to arrange creation of the configuration file by the responsible network adminis
trator. The adapted configuration file for the network settings must be renamed to

ELDS_Combi_Gateway_Configuration.ini

and then copied to the root directory of the USB stick!

«
...
31
32
33
34
35
...
»

Содержание Combi



























































Отзывы:

Нет отзывов

Похожие инструкции для Combi

Бренд: Zero 88 Страницы: 16

Бренд: B&B Electronics Страницы: 83

Бренд: Thompson Страницы: 89

Бренд: Ubiquiti Страницы: 19

OFFICE CONNECT CABLE/DSL SECURE GATEWAY...

Бренд: 3Com Страницы: 102

Бренд: ABB Страницы: 11

Бренд: Siemens Страницы: 12

Бренд: Xantrex Страницы: 80

Бренд: Maverick Страницы: 21

Бренд: ZyXEL Communications Страницы: 56

Бренд: SAGEMCOM Страницы: 29

Бренд: DALCNET Страницы: 22

Бренд: Teltonika Страницы: 6

Бренд: SignalFire Страницы: 31

Бренд: IBM Страницы: 20

Бренд: Rosslare Страницы: 40

Бренд: Thorsis Technologies Страницы: 68

Бренд: Xlink Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды