manualshive.com logo in svg

ECKELMANN Combi, Руководство по эксплуатации

Поделиться
Скачать
ECKELMANN Combi Скачать руководство пользователя страница 41

Installation and Startup of Combi Gateway

35

Version 1.6   04. November 2016

Security

Access to the configuration interface is password-protected for security reasons. Among other things, this
should ensure that unauthorised persons cannot make any changes to parameters of the Combi-Gateway.

When leaving the factory, the access details for the Combi-Gateway are as follows:

User name: 

webadmin

Password: FanTubo3

Al list of the access data for older versions is contained in chapter 3.2.1.

The password should be changed and stored safely after the commissioning! 
The new password should be kept securely against access by unauthorised persons! 
Contact the supplier if the password is no longer available for you.

6.6.2

LAN-Gateway

The LAN-Gateway software module is integrated in the Combi-Gateway as standard. 
Under the tab LAN-Gateway, the TCP port, the CAN bus address, participant information, priority and parame­
ters can be configured using the configuration interface:

Parameters such as TCP port (standard port is 5000), CAN bus address and CAN bus participant information
must be configured for correct functioning.

Refer to chapter 5 of this operating manual for the individual functions of the LAN-Gateway and the appropriate
configuration of the parameters.

The changed parameters are saved by pressing the ”OK” button. 
A manual system restart is required to apply the changes of the configuration; see chapter 6.6.1.3.

If any changes are made to the screen then the 

settings in LDSWin must

 also be changed, for

more information see chapter 5.3!

Содержание Combi



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды