manualshive.com logo in svg

ECKELMANN CI 3000, Руководство по эксплуатации

Поделиться
Скачать
ECKELMANN CI 3000 Скачать руководство пользователя страница 39

Installation and Startup of CI 3000 / SIOX

33

Version 2.09   09. April 2014

5

Installation and Startup of CI 3000 / SIOX

Important Safety Notes

!

Before installation and startup the chapter 1 must be read.
All safety notes and hazard warnings should be noted.

Furthermore, it must be noted that the safety of the system, i.e. installation in which the device is
integrated is the responsibility of the creator of the system, i.e. installation. If the device is used in a
manner not proscribed by Eckelmann AG then the protection supported by the device may be com­
promised!

5.1

Panel mounting

Important safety instructions!

The store computer is designed exclusively for panel mounting!

The CI 3000  Store Computer is assembled in a metal cage with plastic front. The power consumption of the
store computer is 24 VA.

For each of the additional SIOX extension modules, up to a maximum of 4, an additional 2 W of power input is
required.

The natural convection of the circulating air, assuming the free exchange of air, is sufficient for the
operation of the controller. A sufficiently large air inlet (min. 100 mm) beneath the device and an un­
obstructed air outlet above it must be provided at all times. If this cannot be guaranteed then forced
ventilation is required!

Содержание CI 3000







































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды