Chapter 4
Page 126
Dish Antenna Installation
2. Select the satellite your dish will be pointed toward.
3. Select
300
under the
Dish System
.
4. Use the number buttons on the remote to enter your ZIP code to get the
necessary azimuth and elevation. Write these numbers down in the spaces
provided in the margin.
5. Mount the dish antenna and multi-dish switches following the mounting
instructions that came with them and the
DISH Pro Wiring Diagrams
starting on
page 128.
6. Connect two RG-6 cables from both
S
ATELLITE
I
N
connections on the receiver
to two available ports on the switch(es).
7. Connect the LNBF on the dish antenna to LNBF port 1 on the switch(es) using
RG-6 cable.
8. Select
Check Switch
from the
Point Dish
menu. When the
Check Switch
screen opens, select
Retest
.
9. When
Check Switch
is complete, you will see an
Installation Summary
screen
similar to the one shown next. It will show a connection (“Conn” next to
satellite) and
Single
device under
1
(Dish Input). It may also show an
X
on the
Transponder line
.
This is okay and does not mean there is a problem with the
system.
10. Press
CANCEL
to exit back to the
Point Dish
menu.
11. Point the dish for the strongest possible signal, following the instructions that
came with it.
Azimuth:
Elevation:
Содержание DISH Pro
Страница 54: ...Chapter 2 Page 48 Receiver Description and Installation Notes ...
Страница 140: ...Chapter 4 Page 134 Dish Antenna Installation Notes ...
Страница 158: ...Page 152 Chapter 5 Reference Notes ...
Страница 159: ......