EchoStar DISH Pro, Руководство пользователя

Страница: 53 / 178

Page 47
Setting Up TV1 to Operate in IR
Setting Up TV1 to Operate in IR
The following instructions describe how to set up TV1 to operate in IR only.
1. Perform the following with an existing remote control:
a. Open the
TV1 UHF Pro Setup
screen by pressing MENU-6-1-8 on the
remote control.
b. Select
Disable
from the
TV1 UHF Pro Setup
screen.
c. Select
System Info
to open the
System Information
screen.
2. Perform the following with an IR remote control, such as a Remote Control
5.0 (as shown on the back of the remote), that you intend to use to control
TV1:
a. Press the RECORD button. The
Done
button should be highlighted.
b. Make sure the
System Information
screen shows that the
Primary
Remote Address
shows
IR
.