Echo PAS Series Скачать руководство пользователя страница 36

Страница: 36 / 52

ENGLISH

WARNING

Edger operation may scatter ground debris that can cause unstable

or slippery footing, and increase the risk of slips and falls. Always

maintain proper footing and balance while operating edger. Stop

unit if necessary, and remove excessive debris from work path be

fore continuing.

• ALWAYS

maintain control using a secure,

wrap-around, two-handed grip when operating

the power edger. If the edger strikes a buried

object, it may kick up and out of the edging cut

forcefully, causing serious injury.

• NEVER

operate with unit on left side of

operator. Use only on right side of body to

keep operator out of edger debris flow.

• ALWAYS

maintain a stable, balanced stance,

and use extra care when walking on uneven,

slippery, or sloping surfaces.

• ALWAYS

use extreme care when walking on

wet surfaces. Wet surfaces reduce traction,

and increase the risk of slips and falls.

• ALWAYS

be aware of ground and walkway

conditions in the work area, and be prepared to

maintain balance and footing when conditions

change.

• ALWAYS

check edging area for all potential

hazards before edging, and remove objects

that can be thrown or cause kick-out.

• NEVER

edge where the cut line passes directly

over buried hazards such as sprinkler pipes,

electric wiring, gas lines, or other similar

hazards.

• NEVER

operate edger in any area where

electric extension cords are on the ground.

• NEVER

use edger in gravel, rocky soil, or

in areas with hard ground cover such as

decorative rocks.

• NEVER

attempt to clear debris build-up from

debris shield by tapping shield against the

ground.

• ALWAYS

shut engine off, wait for blade to

stop, and disconnect spark plug wire. Remove

debris with a small non-scratching scraper.

Wear gloves to protect hands from contact with sharp edges and hot

surfaces.

ENGINE

OFF

Edger Operator in

Operating Position

Prohibition - Edger

Operation w/Electric

Cord on Ground

Debris Removal with

Scraper

OPERATION

Содержание PAS Series





















































Результаты поиска

Содержание PAS Series

Отзывы:

Похожие инструкции для PAS Series

Бренды по названию

Популярные бренды

Echo PAS Series, Руководство по безопасности

Результаты поиска

Содержание PAS Series

Отзывы:

Похожие инструкции для PAS Series

Бренды по названию

Популярные бренды