Echo PAS Series Скачать руководство пользователя страница 42

Страница: 42 / 52

ENGLISH

PAS PRO-THATCH ATTACHMENT

Misuse, improper assembly, or use of unapproved

attachments, can result in serious injury, engine failure,

and voiding of warranty. Use only attachments approved

for use on Pro Attachment Series models. Contact with

moving work attachments can cause entanglement and

serious injury. Keep clear of moving work attachment.

• ALWAYS

check Pro-Thatch tines for damage and

secure attachment before using unit. Replace

tines if damaged or missing.

• NEVER

use ProThatch without dethatcher guard

in place. Operation without a guard exposes

operator to flying debris and rotating steel tines.

• ALWAYS

install J-Handle before using unit,

and adjust position as needed to accommodate

operator. J-Handle provides best control and

comfort when operating unit.

• NEVER

replace tines with engine running. Stop

engine and disconnect spark plug lead. Wear work gloves when replacing

or handling tines.

PAS POWER EDGER ATTACHMENT

Misuse, improper assembly, or use of

unapproved attachments, can result in serious

injury, engine failure, and voiding of warranty.

Use only attachments approved for use on

Pro Attachment Series models. Contact with

moving cutting or work attachments can cause

entanglement and serious injury. Keep clear of

moving work attachment.

• ALWAYS

check edging area for hidden objects,

and remove all dangerous debris.

• ALWAYS

stay clear of spinning edger blade.

• NEVER

operate with unit on left side of operator.

Use only on right side of body to keep operator out

of edger debris path.

• NEVER

use edger in gravel, rocky soil, or in

landscape beds with decorative rock ground cover.

• ALWAYS

use only approved edger blades.

• NEVER

use edger blades on any trimmer or brush cutter.

• NEVER

operate edger attachment unless all edger blade hardware has

been properly installed.

• ALWAYS

use a new split pin each time blade is installed or replaced.

• NEVER

operate edger with damaged or missing debris shield.

Pro-Thatch

Attachment

Position Edger

on right side of

operator only

OPERATION

Содержание PAS Series





















































Результаты поиска

Содержание PAS Series

Отзывы:

Похожие инструкции для PAS Series

Бренды по названию

Популярные бренды

Echo PAS Series, Руководство по безопасности

Результаты поиска

Содержание PAS Series

Отзывы:

Похожие инструкции для PAS Series

Бренды по названию

Популярные бренды