Echo PAS Series Скачать руководство пользователя страница 12

Страница: 12 / 52

ENGLISH

WARNING

Move STOP switch to STOP position and

disconnect spark plug lead at spark plug

before assembling unit. Do not connect

spark plug lead to spark plug until unit is

properly assembled, checked, and ready

for use.

ALWAYS

wear eye protection that meets

current ANSI Z87.1 requirements. Operators

that wear prescription glasses must wear

appropriate protective eyewear over glasses.

For additional safety, a full-face shield may

be worn over the safety eyewear to provide

complete face protection.
If parts are missing, or if you have a problem

installing parts, contact your Dealer for

assistance or call Consumer Product Support.

DANGER

Metal grass, weed, brush, and clearing blade edg-

es are extremely sharp. Accidental hand or body

contact with blade edges can result in severe cuts,

even if the engine is off and blades are not moving.

Always wear sturdy work gloves when handling

blades. Do not allow blades to contact any part of

your body. Work gloves do not provide protection

from contact with moving blades. Always keeps

hands and body away from moving blades.

NEVER

fuel, start, or operate your unit unless it is fully

assembled, all shields and required guards are in place,

and the throttle lock-out lever and trigger are working

properly.

NEVER

install any other type of blade, line head, cutting

attachment, part, or accessory on your trimmer/brushcutter

unless it is approved for use on your specific

model. Parts and accessories that appear to fit

properly may create a safety hazard when the unit

is operated, and could result in serious injury to

operator and bystanders.

ALWAYS

use the correct tools for assembly. Using

incorrect or improperly sized tools can result in a

sudden slip and serious injuries.

ALWAYS

follow the assembly instructions in order, as shown in the Operator’s

Manual. Improper assembly can result in sudden part failure, and serious

injuries.

Spark

Plug

Spark

Plug

Wire

Keep feet and

hands away

ASSEMBLY

Содержание PAS Series





















































Результаты поиска

Содержание PAS Series

Отзывы:

Похожие инструкции для PAS Series

Бренды по названию

Популярные бренды

Echo PAS Series, Руководство по безопасности

Результаты поиска

Содержание PAS Series

Отзывы:

Похожие инструкции для PAS Series

Бренды по названию

Популярные бренды