Echo PAS Series Скачать руководство пользователя страница 28

Страница: 28 / 52

ENGLISH

GRASS TRIMMER & TRIMMER/BRUSHCUTTER

GT/SRM/PAS Units - Using Nylon Line Heads

WARNING

Flying Debris

Line heads rotate at high speed - rotating ny-

lon line can throw debris with sufficient force

to cause injury. Keep bystanders and pets

out of the “Danger Zone,” a 50 foot (15 meter)

radius around the unit being operated.

• ALWAYS

check area for hidden hazards before

starting. Trimmer head or nylon line contact with

hidden hazards (sprinkler heads, metal stakes,

etc.) can result in loss of control of unit, nylon

line breakage, and flying pieces of line or other

ground debris.

• Make sure line head is securely attached to gear

case drive shaft, and, if used to install line head,

locking bar has been removed.

•

Make sure cut-off knife is properly assembled to the

debris shield, and nylon line head is secured.

• Make sure debris shield is aligned with drive shaft,

and is properly secured to the gear case housing.

•

Keep debris flow directed away from operator to

minimize risk of being struck and injured by flying

debris. Debris flows in direction of line head rotation at

point of cutting contact. Change line head position

as needed to change debris flow.

• Contact with spinning nylon line will cause serious

injury. Keep hands, feet, and all other body parts

away from line head.

• Keep cutting line away from wire fences to

avoid entanglement with loose or broken wires.

Entangled fence wire can spin around with cutting

head at high speed, and cause serious injuries.

• NEVER

operate trimmer with cutting head above

knee height - operation with the cutting head well

above ground level produces a higher debris flow,

and can cause debris to strike you in the face.

Make sure line

head is securely

fastened

Keep cutting head

away from wire

fences

OPERATION

Содержание PAS Series





















































Результаты поиска

Содержание PAS Series

Отзывы:

Похожие инструкции для PAS Series

Бренды по названию

Популярные бренды

Echo PAS Series, Руководство по безопасности

Результаты поиска

Содержание PAS Series

Отзывы:

Похожие инструкции для PAS Series

Бренды по названию

Популярные бренды