manualshive.com logo in svg

ECHO Robotics TM-1000, Техническое руководство

Поделиться
Скачать
ECHO Robotics TM-1000 Скачать руководство пользователя страница 50

M

AINTENANCE

 G

ENERAL

 I

NSPECTION

 

AND

 C

LEANING

47

10.3.9 Cutting Heads

SHARP BLADES

Contact with cutting blades can result in cutting of
fingers or hands.

•

Wear protective gloves when handling the
robot.

Clean the cutting head assemblies once per week.

Verify that the cutting head assemblies move smoothly
up and down and the cutting discs and anti-friction
discs rotate freely. The cutting head should not have an
excessive amount of lateral movement.

10.3.10 Winter Storage

•

Charge the battery to 100% before storing.

•

Complete all weekly, 6 month, and annual main-
tenance procedures.

•

Schedule service procedures with an authorized 
ECHO Robotics Dealer (if required).

•

Store the robot in a protected dry location where 
the temperature is above 32° F (0° C).

At the start of a new season:

1)

Move the power switch to the ON position.

2)

Place the robot onto the charging station and
allow the battery to fully charge.

3)

Run the robot as normal and observe for correct
operation.

1 – Cutting Head Assembly

Содержание TM-1000










































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды