Support:
Support.Eccotemp.com
Shop Online:
www.Eccotemp.com
Store Locator:
Eccotemp.com/locator
EnglishEnglish
3
7
PLEASE NOTE: SH22 IS FOR OUTDOOR PERMANENT INSTALLATIONS ONLY AND SH22I IS FOR INDOOR PERMANENT INSTALLATIONS ONLY. THIS MANUAL
AND ALL ECCOTEMP CONTENT IS SUBJECT TO CHANGE WITHOUT NOTICE. PLEASE VISIT SUPPORT.ECCOTEMP.COM FOR MORE INFORMATION.
Designed in
Summerville, SC
Support:
Support.Eccotemp.com
Shop Online:
www.Eccotemp.com
Phone:
866-356-1992
Installing the SH22i Water Heater
Installation Check List
A. Water Heater Location
• Installed indoors
• Close to area of mostly used outlet
• Protected from freezing temperatures
• Proper clearance from combustible surfaces observed
• Sufficient fresh air supply for proper operation of water heater
• Air supply free of corrosive elements and flammable vapors
• Provisions made to protect area from water damage
• Sufficient room to service heater
• Combustible materials, such as clothing, cleaning materials, rags,
etc. clear of the heater and vent piping
• Water heater is properly attached to the wall
B. Water Supply
• Water supply has sufficient pressure
• Air purged from water heater and piping
• Water connections tight and free of leaks
• Water filter is clean and in place
• Materials used are as instructed in this manual
• Water pipes are insulated
C. Gas Supply
• Gas type matches rating plate
• Gas supply pressure is sufficient for the water heater
• Gas line equipped with shut off valve, union and sediment trap
• Approved pipe joint compound used
• Commercial leak detector or soap and water solution used to check all
connections and fittings for possible gas leak
• Gas company inspected installation (if required)
D. Relief Valve
• Pressure relief valve properly installed and discharge line run
to open drain
• Discharge line protected from freezing
E . Electrical Wiring
• Voltage matches rating plate
• Water heater is properly grounded
• Wiring meets all local codes
• GFCI protection where required